Benefits
of Remote Mounting:
Ease of installation.
Our turbo systems can be installed in 4-6 hours
with standard tools and average mechanical ability.
Increased gas
mileage. Unlike a belt driven supercharger, the
turbo utilizes "wasted" energy leaving
your tailpipe. Most of our customers get 2-4 mpg
increase in gas mileage.
No need for major
modifications to your vehicle. Our systems are
designed to bolt on using factory mounts without
cutting or modifying your vehicle.
Lower underhood
temperatures. No need to worry about melting wires,
hoses, or other components.
Easily converts
back to stock in less than an hour.
More room under
the hood. Future repair work or modifications
will not require the expense of removing the turbo
system to allow access to any of the engine components.
Cooler oil to
the turbo. Cool oil is better for both the turbo
and engine.
Approximately
500F lower turbo temperatures. Eliminates the
need for a turbo-timer, which allows the engine
to run after the car is shut off in order to cool
down the turbo and prevent oil and bearing damage.
Denser exhaust
gasses drive the turbo turbine wheel more efficiently.
Built-in intercooling.
Intake piping provides ~50% intercooler efficiency.
There is no need for the expense, pressure drop,
and installation problems associated with a front
mounted intercooler.
Turbo is exposed
to ambient air rather than underhood air. Allows
for better cooling of turbo components.
No need for expensive
headers, mufflers, or exhaust systems.
Turbo is closer
to the tail pipe outlet. Provides a better pressure
differential across the turbine wheel which promotes
better flow across turbine.
Better weight
transfer. Increases traction because the bulk
of system is mounted in rear of vehicle rather
than up front.
Less noise in
the passenger compartment.
Quieter wastegates,
especially if vented to atmosphere.
Better engine
cooling capacity.
