Ease of installation. Our turbo systems can be installed in 4-6 hours with standard tools and average mechanical ability.
Increased gas mileage. Unlike a belt driven supercharger, the turbo utilizes "wasted" energy leaving your tailpipe. Most of our customers get 2-4 mpg increase in gas mileage.
No need for major modifications to your vehicle. Our systems are designed to bolt on using factory mounts without cutting or modifying your vehicle.
Lower underhood temperatures. No need to worry about melting wires, hoses, or other components.
Easily converts back to stock in less than an hour.
More room under the hood. Future repair work or modifications will not require the expense of removing the turbo system to allow access to any of the engine components.
Cooler oil to the turbo. Cool oil is better for both the turbo and engine.
Approximately 500F lower turbo temperatures. Eliminates the need for a turbo-timer, which allows the engine to run after the car is shut off in order to cool down the turbo and prevent oil and bearing damage.
Denser exhaust gasses drive the turbo turbine wheel more efficiently.
Built-in intercooling. Intake piping provides ~50% intercooler efficiency. There is no need for the expense, pressure drop, and installation problems associated with a front mounted intercooler.
Turbo is exposed to ambient air rather than underhood air. Allows for better cooling of turbo components.
No need for expensive headers, mufflers, or exhaust systems.
Turbo is closer to the tail pipe outlet. Provides a better pressure differential across the turbine wheel which promotes better flow across turbine.
Better weight transfer. Increases traction because the bulk of system is mounted in rear of vehicle rather than up front.
Less noise in the passenger compartment.
Quieter wastegates, especially if vented to atmosphere.
Better engine cooling capacity.
Feel free to email us with any questions.
- The JL Team, serving you since 2003